the voltage vocal cords...

 Everyone has a buffer in their vocal cord…if you use a high drive strength and shout, it may drive the signal farther and deeper but it adds lot of xtalk, noise violations, power wastage, needs lot of shielding and can sometimes violate hold which we cannot take back with an apology buffers…always use optimal drive buffers, set high drive buffers as don’t use…for a longer reliability in relationships..

some people have an entire 8 bit octave control bus with DVFS and power gating installed and when they sing, the signals switch simultaneously and melodiously..

normally one should use inverter pairs so the duty cycle distortion is balanced...the inverter pair indicates whenever the voltage rises, we better fall it back to reduce the distortion of the meaning what we want to convey...

if one has an odd number of inverters, obviously the lec fails and to make lec pass, more inverters are added which makes it difficult to debug and fix the lec eventually...

very low drive buffers do not help as they make one low in confidence and assertiveness...

internally a powerful power gating and clock gating is needed without which there will be lot of dynamic and leakage power which can lead to unnecessary misunderstandings...

People need a good-quality band-pass filter between their brain and mouth—not everything they think needs to be said.

critical signals, speaking to elders need to. be well shielded, custom routed with higher layers of politeness and double spacing respect...

highly intellignet people speak at double data rate which becomes difficult to meet the setup and hold timing simultaneously...

some people mux wit and pun logic to enable the entertain mode workloads that bring in cheerful output on the face...

above all, sometimes, no output silence is a more valuable output...

Comments

Post a Comment

Popular posts from this blog

Ugadi Rasi Phala for VLSI folks

బద్ధకస్తులు కారణజన్ములు

RetirEMigration Limits